A full service theatrical lighting, staging, audio/video and outdoor roofing systems production company
  • JBL VRX 918

    Description

    The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18″ woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers..

    • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
    • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and
      light weight.
    • Integral rigging hardware for simple connection of enclosures and optional array frame.
    • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
    • Large port area for reduced distortion.

    Additional information

    85lbs
    20.0 in x 23.5 in x 29.5 in

    Power Rating
    1500 Watts Peak
    LF: Dual-Bridged Technology™, Class D

    Frequency Range
    31 Hz – 220 Hz

    Dimensions
    (H x W x D)
    508 mm x 597 mm x 749 mm
    (20.0 in x 23.5 in x 29.5 in)

    Frequency Response: 34 Hz – 220 Hz

    Maximum Peak Output: 126 dB SPL at 1m

    Bandpass Nominal Impedance: LF: 2 x 2 ohms

    LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
    Differential Drive® woofer with neodymium-magnet

    Audio Input Connector: XLR with loop through

    User Controls

    Input Attenuator (0-16 dB)
    Selectable 80 Hz or 120 Hz Low Pass
    80 Hz High-Pass enable/disable for XLR loop thru.

    Signal Processing
    DSP based, resident in Input Module

    System Management: DSP based limiters for mechanical and thermal protection

    AC Power Operating Range:L 90-132 VAC or 216-264 VAC, 50/60Hz

    AC Line Voltage: User selectable: 120V/240V (-15%, +10%)

    AC Input Connector: Neutrik PowerCon (NAC 3MPA)

    AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)

    AC Current Requirements: 6A per system at 120V, 3A per system at 240V

    Enclosure: 18 mm birch plywood.

    Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts

    To receive a quote on any item in our catalogue, please send an email to info@lightaction.com Dismiss