Description
- Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Locking power cord clip provides a secure connection between the amplifier and power cord
- Updated HiQnet System Architect™ control software
- Increased number of presets to a total of 50; 49 of which are user definable
Additional information
24lbs
- Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz to 20 kHz): +0 dB, –1 dB
- Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms):
- XTi 1002/2002/4002: 100 dB (A weighted),
- XTi 6002: 103 dB (A weighted)
- Total Harmonic Distortion (THD): < 0.5%
- Damping Factor 20 Hz to 1 kHz: > 500
- Crosstalk (below rated power):
- 20 Hz – 1 kHz: > 70 dB
- Input Impedance (nominal):
- 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations:
- 100VAC, 120VAC, 220-240VAC 50/60Hz
- AC Line Current (120 VAC amplifier playing
- 1/8 power pink noise into 4 ohms per ch):
- XTi 1002: 6.8A; no more than 38W at idle,
- XTi 2002: 8.3A; no more than 38W at idle,
- XTi 4002: 10.5A; no more than 38W at idle,
- XTi 6002: 15.3A; no more than 180W at idle
Power Rating
| DUAL |
BRIDGED |
| Model |
2-ohm |
4-ohm |
8-ohm |
4-ohm |
8-ohm |
| 1002 |
700W* |
500W |
275W |
1,400W |
1,000W |
| 2002 |
1,000W* |
800W |
475W |
2,000W |
1,600W |
| 4002 |
1,600W* |
1,200W |
650W |
3,200W |
2,400W |
| 6002 |
3,000W* |
2,100W |
1,200W |
6,000W |
4,200W |
